On to Machine Shop Special Projects - Sub-scale Muzzleloading Artillery

On this page, we will finish the muzzle rings and then round all of the mouldings.  First, we will cut all the rings as square edged cylinders as we have done with all of the decorations so far.



Then we need to grind some corner rounding bits and get to work.  First we will finish off the muzzle and the muzzle fillets and astragal.



Then the chase girdle and second reinforce.



Then finally the breech rings and cascable.



The barrel is starting to actually look like a cannon barrel.





Next we will do the trunnions and trunnion pockets.

Back to Beginning